NAture Power Solar Kit Review

pastedGraphic.png

Are you craving for sustainable electricity or going off the grid for some time? You need a quiet and highly efficient solar energy for electricity when going camping or any other activities. In fact, a countless number of people are subscribing to the idea of installing solar panels. No doubt, trying to get uninterrupted electricity while off the grid can be very costly, and even business and homeowners are purchasing portable and easy-to-install solar panel kits. So, to this end, the 100 Watt solar panel at Northern Power is doing the magic.

Among one of the top solar panel kits sold in the market, nature power solar panel is another state-of-the-art electronics. Well, in part, because of reliability and long-term performance, it’s still one of few best solar panel kits guaranteeing at least 80% efficiency up to 25 years – and I think this is very reasonable.

While 100watt solar panels can be very good at producing solar energy, they are smaller than typical residential ones. In fact, they are limited in the number and types of appliances or devices they can power. So, it is also important for you to know that each member of the kit can be bought separately in case you only want a replacement; but for new buyers, the best thing you can opt for is buying the full solar panel kit.

Whether you’re taking time out or simply thinking which solar panel kit to buy, you should consider reading this till the end.

Are there types of Nature Power solar panels?

Nature power solar panels, especially the 100watt, comes only in polycrystalline surfaces. The second type is the monocrystalline solar panels which are specifically used for the 110watt solar kit. I’m sure you want to know what makes the difference between the two. Well, the monocrystalline solar panel is more expensive to build than a polycrystalline one – this is probably why people opt out for polycrystalline solar panels because they are cheap.

Actually, the remnant of the silicon used in making monocrystalline solar panels are used for polycrystalline panels; this means that monocrystalline requires more investment than polycrystalline. And by emphasis, a typical monocrystalline panel tends to perform 20 percent more than regular polycrystalline solar panel.

Can I recognize the types of solar panels?

pastedGraphic_1.png
pastedGraphic_2.png

Oh yeah, you can! Generally, 100 Watt solar panel measures around 47 x 21.3 x 1.4 inches. Merely looking at the panels, you can spot the difference immediately. The polycrystalline solar panel has blurred color and sometimes come in white back and silver frames and anti-reflective glass.

Monocrystalline solar panel, on the other hand, has silicon purely cut and arranged into pieces of crystal, so, you’ll easily identify it by its arrangement of silicon. It is also a high semi-conductor of electricity – able to convert sun energy to electricity effortlessly.

Furthermore, the wafers of the silicon crystal appear in shapes of rows and columns and the finishing is protected by a glass sheet. These materials give the monocrystalline solar panel the aesthetic value it commands. And finally, silver, white shade, or charcoal black are colors you can identify the monocrystalline solar panels with.

Is nature power solar panel any good?

Oh yeah, if you’re not asking if the 100 Watt solar kit is worth the value for money, you wouldn’t be reading this review. First, the polycrystalline solar panel is augmented with an extra 3.2mm safety and anti-reflective glass.

It is equipped to produce up to 100 Watt power by using just the sun and secondly, it can be paired with the Huntley portable 1800 Watt solar nature generator to produce double the recharge power.

Furthermore, it comes with a 300 Watt power inverter with input/output – and that implies enough capacity for light conversion to electricity. So you’ll know, to regulate power and current entering the battery, an 11 AMP charge controller is part of the kit. And, this is higher compared to regular 100 Watt solar kits having 10 AMP. Interesting, right? Yeah, I know.

It is also very easy to install using the detailed step by step process in the manual and as I’m going to show you shortly.

What’s in the 100 Watt solar kit?

Charge Controller

It is important for you to know that any solar energy panel designed from 12 watts at least, requires a charge controller, and the Nature Power Solar Panel as well as charge controller, come with easy to use J-plug adapters.

Nature Power solar charge controller protects the 12V battery from overcharging or discharging.

For a clearer understanding of what I’m talking about, below is a table of specifications for the charge controller. 

pastedGraphic_3.png

Although nature power charge controller can handle the full watts of the solar power, it is important to note the following:

LED light shows battery Charging or Charged. During usage, don’t let your battery volt go below 11V – having volts below this range will damage your battery; hence, a Digital Multi-Meter (DMM) can be used to measure the battery voltage.

Full battery charge indicates GREEN at 14.2V on the LED light; and once this occurs, the charge controller auto-shutoff to prevent Overcharge.

YELLOW LED light signals battery charging below 13V and the controller auto-cuts in to allow the solar panel to keep charging

Power Inverter

Interestingly, the 100 Watt solar kit comes with a 300 Watt power inverter with both input and output protection. Connected with a 12V battery, the 300 Watt inverter can efficiently create 120V electricity to power devices.

What appliances can work with 300 Watt (W) output power inverter?

Like I said earlier, because of your solar panel and 12V battery capacity, you’re constrained to certain kinds of devices the energy can power. However, if you are able to increase the solar panel (but below the capacity of the inverter and batteries), you will get higher energy to power some devices since they generally consume lower energy. Examples of the electrical appliances that can work a typical 300 Watt output inverter are Water purifier, TV, Fan, Phone charger, Speakers, Laptop, etc. To know more about your solar kit capacity check here to search for watt consumption of the appliances you want to share the energy with

How do I install Nature power solar kit?

Because there is constant mobility of people from one place to another, portable solar panels are being produced to meet such needs, solar panel kits are being made in portable and convenient sizes. This is the time to say bye to panel kit installations that often need professional electricians – all you need is simply the knowledge of where “black and red” battery clamp cable will be, and that’s all.

As you’ll see, the manual you’ll be given as a part of the kit specifies majorly on the 110 Watt solar panel with little emphasis on 100 Watt panel. So, you can do much by following the below information.

Let’s look at the simple steps (how to install a 100 Watt solar panel kit at nature power).

Remember…! The battery is not included in the solar kit, so, you’ll need a 12V battery to power the system.

Mounting the panel

The first thing you need to do before making any connection is to determine the site where you’ll mount your solar panels, and such location must be entirely free from the shade and placed where it will always receive direct sunlight daily. You need to figure out where the sun mostly comes out in order to mount your solar panel facing that direction. However, a tilt position of the panel is advisable to enable effective solar power absorption.

Using the Z-bracket (not included in the 100 Watt kit – but sold separately), you can permanently install it leveled to face your chosen direction of sunlight.

Ensure you have an accurate measurement of the distance between the mounted solar panels and connecting kits like the battery (not included) and the controller (included).

The charge controller must be in proximity (about 5 feet) to the battery bank – remember to use an appropriate DC electrical wire guide in choosing the wire gauge for the length of the wire.

Are you mounting your solar panel on RV?

If you, however, choose to install your solar panel on an RV, ensure it is mounted to the rood.

Rubber roofs with thin plywood will need molly fasteners to have a stronger grip.

People with fiberglass roofs should also drill some pilot holes reaching the plywood underneath.

Also, if your RV has a metal roof, the solar panel should be mounted to the joist supporting the roof.

How to connect the solar panel, charge controller, inverter, and battery 

pastedGraphic_4.png

Below are the summarized installation steps of the kit to get your system running.

  1. Using the SAE-battery clamp, connect the charge controller. Make sure you have a parallel connection of POSITIVE-POSITIVE and NEGATIVE-NEGATIVE.
  2. Then Connect the 11 AMP charge controller to the panel.
  3. Connect 300 Watt power inverter to the battery using bare end-battery clamp (included).

PROS

Easy to set up

I will call this a basic “setup plug and play”. Except for the panel mounting process (depending on where you want it located) that may require little know-how, I think it’s quite easy to do. In fact, you should read my simplified installation process again if you still haven’t gotten how to install your panel.

Higher Battery controller

The charge controller is really a good component to point at. Compared to other products giving 10AMP, Nature power is doing well on their 11AMP charge controller.

One full year warranty

This is another nice thing I have found with this Nature power solar product. You have up to a year to validate if you want to continue using the solar kit – and return must be free from any kind defect. Also, you have 2 years to validate if the solar panel kit generates the attested 80% of the rated power.

CONS

Z-mounting brackets have to be bought separately. I think this should have been included at no extra cost. Besides, the 110watt solar panel kit has the mounting bracket included, so, removing it doesn’t really worth it.

Another thing with the solar kit is the fact if want to add an extra battery for more energy storage, you’ll need to get their customer service for system configuration – which I think is literarily exhausting. Since the design is to suit e.g., mobility or nomadic activities, users should easily add more storage to save excess solar energy once the 12V battery is full. They should have just made the whole solar panel kit universally configured.

Final Note

Is it worth buying? Well, while there are many solar kits out there, solar panels at nature harbor appear to be doing much – though, you need to check it out for yourself; but, based on my findings in this review, I perceive you’ll enjoy it. The price for the kit remains to vary – at least, Norther Tools’ current price  for 110 watt states $149 while  Earthtech states $249 for the 100 Watt solar kit.

Leave a Comment